Amplifier Stereo Receivers Home Audio Outdoor Amplificador Dual Channel Sound

Description

DESCRIPTION
Power Amplifier
·
Stereo Mode
v
Respectively connect the left & right signal source with CH1 and CH2. The output terminals respectively connect with a speaker.
·
Parallel Mode
v
Respectively connect speaker with output terminal of each channel. The output volume of each channel is controlled by the volume knob at the front panel.
·
Bridge Mode
v
Connect the positive terminal of both channels to speakers. The output volume is controlled by CH1/CH3 volume knob at the front panel.
·
LED display
·
Thermal protection for overheat overload, short circuit, dc, soft start
·
Ready situation, signal indication, clip indication
·
Gain control channel 1, channel 2
·
Balance XLR input CH1,CH2, input connection
Technical Specifications:
8 ohm stereo power
1200Wx2
4 ohm stereo power
1800Wx2
2 ohm stereo power
2400Wx2
8 ohm bridge power
3600W
4 ohm bridge power
4800W
Frequency Response
20Hz-20KHz±0.3dB
THD+N
<0.05%@8Ω 1KHz
S/N Ratio
>103dB
Slew Ratio
35V/μS
Damping Factor
>800
Crosstalk
>70dB@8Ω 1KHz
Input Sensitivity
1.4V
Input impedance(balance/unbalance)
10KΩ/20KΩ
Voltage gain(sensitivity:8ohm)
38dB
Output Circuitry
Class H
Cooling
Air flow from front to rear
Protection
Soft Start, Dc, Short Circuit, Over Load, Clip Limit, Over Heat, Progressive Volume
Product Dimensions (W*H*D)
515*485*133(3U)
Packing Dimensions (W*H*D)
665*590*203
G.W(±5KG)
42KG
Power cord
BS 1363 Standard
AC110V/60HZ.±10%
AC120V/60HZ.±10%
USP:
·
High performance
·
Three modes of operation for ease of installation according to the need of event.
·
Best suitable for live stage/DJ/studio/auditorium/worship.
·
Thermal protection for overheat overload, short circuit, dc, soft start