AUDIOSOURCE AMPSUB210 Subwoofer Amp

Description

With its continued excellence in sound reproduction,
AudioSource
has once again created a versatile subwoofer amplifier. The
AMPSUB210 Subwoofer Power Amplifier
offers superb functionality and a heavy-duty design that will be hard to match. It features Triple-Darlington power amplifier stages, front panel diagnostic LEDs, 2-stereo (low-level) inputs, speaker (high-level) inputs, one LFE input, and one auxiliary (low-level) output. In a nutshell, this amplifier offers 200W at 8 ohms bridged, 300W at 4 ohms bridged, and is capable of delivering breathtaking low frequency sound with an audio signal-to-noise ratio of 100dB.
In addition, it features an expandable daisy-chain input/output for your audio components, rack mounting capabilities, an amazing 5Hz - 500Hz frequency response, A/B speaker switch, adjustable time delay between zones, light bar display switch, front panel subsonic filter and variable crossover control.
Triple Darlington Amplifier Outputs
This amplifier uses Triple Darlington Amplifier Outputs that are comprised of Complementary Bipolar Transistors capable of delivering a clean, high current signal.
Superior Sound Quality
With a frequency response of 5Hz - 500Hz, 200W at 8 ohms, signal-to-noise ratio of 100dB, it can reproduce thunderous deep bass tones.
Most of the amplifier's audio processing is handled automatically, with little intervention on your part. However, the AMPSUB210 is so advanced; its discrete low-level output reproduces music with unmatched sonic clarity and dynamic power.
It offers the ability to reproduce 200W per channel into an 8 ohm load, or 300W mono channel into 4 ohms.
It features a 12V trigger input, that can be turned on and off from an A/V receiver/controller that has a 12V output.
Set between 5Hz and 50Hz to filter out unwanted lower frequencies.
Sets crossover frequency between 40Hz and 500Hz.