Crestron CNAMPX-16X60

Description

Taken From Crestron Website. Item has since been discontinued. These are quite heavy, hence the cost of shipping.
Audio
Typical of 8 Stereo Room Outputs:
Output Power
20Hz to 20kHz, all outputs driven at rated THD:
60 watts per channel at 8 ohms
90 watts per channel at 4 ohms
220 watts at 8 ohms bridged (channels 1-4 and 13-16 only; requires
CNXBRMO
, sold separately)
Power Bandwidth
3Hz to 50kHz, +0/-3dB
Frequency Response
20Hz to 20kHz, +0/-0.1dB at 1 watt, 8 ohms
Total Harmonic Distortion (THD)
≤0.03% at full power
IHF I.M. Distortion
≤0.01%
SMPTE I.M. Distortion
≤0.03%
Dynamic Headroom
≥2dB
S/N Ratio
>110dB A-weighted
Gain
28dB
Damping Factor
>400
Channel Separation
>100dB, 20Hz to 20kHz
Connectors
ROOM INPUTS 1 – 8
(16) RCA female comprising (8) unbalanced stereo line-level audio inputs;
Input Impedance: 28k ohms;
Connect to room outputs of
CNX-PAD8A
or
CNX-BIPAD8
ROOM OUTPUTS 1 – 8
(16) Dual 5-way binding posts comprising (8) stereo speaker-level audio outputs;
Output Power: 60 Watts/Ch. @ 8 ohms, 90 Watts/Ch. @ 4 ohms
G
6-32 screw, chassis ground lug
NET
(1) 4-pin 5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network
120V AC 60Hz
(1) IEC male and main fuse holder;
IEC: Mates with removable power cord (included);
Fuse: 3AG, 15 Amps, 250 Volts, fast-acting
Controls & LED Indicators
POWER (front)
(1) Toggle switch with (1) green LED, enables/disables main power if Cresnet power and mains power are connected
PWR (rear)
(1) green LED, indicates 24 Volts DC power supplied from Cresnet control network
NET (rear)
(1) yellow LED, indicates communication with Cresnet system
OVERRIDE/SETUP (rear)
(1) miniature pushbutton and (1) red LED, overrides control system to activate main power and enable all room output channels; Cresnet power and mains power must be connected; also used for touch-settable ID (TSID)
Power Requirements
Main Power
120 Volts AC ±10%, 50-60 Hz, 1800 Watts
Cresnet Power Usage
12 Watts (0.5 Amps @ 24 Volts DC)
Environmental
Temperature
41° to 104°F (5° to 40°C)
Humidity
10% to 90% RH (non-condensing)
Enclosure
Black metal, 4U 19-inch rack-mountable (rack ears included)
Dimensions
Height
7.69 in (19.53 cm);
7.0 in (17.78 cm) without feet
Width
17.18 in (43.64 cm);
19.0 in (48.26 cm) with rack ears
Depth
17.45 in (44.32 cm)
Weight
90.2 lbs (41.0 kg)
INTERNATIONAL VERSION (230 VAC)
CNAMPXI-16X60
All the features and specifications of the CNAMPX-16X60 except:
Connectors (partial)
ROOM OUTPUTS 1 – 8
(16) Dual binding posts comprising (8) stereo speaker-level audio outputs;
(Banana plugs prohibited);
Output Power: 60 Watts/Ch. @ 8 ohms, 90 Watts/Ch. @ 4 ohms
230V AC 50Hz
(1) IEC male and main fuse holder;
IEC: Mates with removable power cord (included);
Fuses: (2) M205, 8 Amps, 250 Volts, fast-acting
Power Requirements
Main Power
230 Volts AC ±10%, 50-60 Hz, 1800 Watts
Cresnet Power Usage
12 Watts (0.5 Amps @ 24 Volts DC)